Committing Changes - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

DPVM Database Distribution
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 28-13
Choose an available pWWN and login VSAN.
Step 3
Click Create to save this change to the pending database or click Close to discard any unsaved change.
Step 4

Committing Changes

If you commit the changes made to the configuration, the configuration in the DPVM pending database
are distributed to other switches. On a successful commit, the configuration change is applied throughout
the fabric and the lock is released.
To commit the DPVM pending database using Fabric Manager, follow these steps:
Expand Fabricxx> All VSANs and then select DPVM from the Logical Attributes pane.
Step 1
You see the DPVM configuration in the Information pane.
Step 2 Click the CFS tab and select commit from the Config Action drop-down menu.
Step 3 Click Apply Changes to save this change or click Undo Changes to discard the change.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
28-12
Create Config Database
Chapter 28 Creating Dynamic VSANs
OL-17256-03, Cisco MDS NX-OS Release 4.x