Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 144

Launching Fabric Manager Client in Cisco SAN-OS Release 3.2(1) and Later
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Note
Click Discover.
Step 13
You see the Control Panel dialog box shown in
Figure 5-6
Note
Check the check box(es) next to the fabric(s) you want to open in the Select column, or click Discover
Step 14
to add a new fabric.
Note
Click Open to open the selected fabric(s).
Step 15
Note
To launch Fabric Manager Client from within a running instance of Fabric Manager, follow these steps:
Choose File > Open Fabric or click the Open Switch Fabric icon on the Fabric Manager toolbar.
Step 1
You see the Control Panel dialog box (see
Check the check box(es) next to the fabric(s) you want to open in the Select column and click Open.
Step 2
Cisco MDS 9000 Family Fabric Manager Configuration Guide
5-6
If you want a clean discovery, remove the fabric and rediscover it.
Control Panel Dialog Box
You see a message in the dialog box when the server and client are running on the same
workstation and there are unlicensed fabrics in the database. You also see a message when there
are unmanaged fabrics (the state of the licenses is unknown).
Only network administrators can continuously manage or unmanage fabrics. For more
information, see the "Selecting a Fabric to Manage Continuously" section on page
If you have an incomplete view of your fabric, rediscover the fabric with a user that has no
VSAN restriction.
Figure 5-6.
Figure 5-6).
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 5 Fabric Manager Client
3-3.