Importing The Rrd Statistics Index; Configuring The Rrd Database - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Admin
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
b.
Click Apply.
Step 5

Importing the RRD Statistics Index

To manually import the RRD statistics index, follow these steps:
Stop Fabric Manager Server.
Step 1
Copy the original RRD file into $INSTALLDIR/pm/db.
Step 2
Run $INSTALLDIR/bin/pm.bat s.
Step 3
Restart the Fabric Manager Server and add the fabric.
Step 4

Configuring the RRD Database

Configuring the RRD database allows you to set the intervals at which data samples are collected. After
applying the configuration, the database storage format is converted to a new format at those intervals.
Since database formats are incompatible with each other, you must copy the old data (before the
conversion) to the $INSTALLDIR/pm directory.
page
To configure the RRD database using Fabric Manager Web Client, follow these steps:
Click the Admin tab, and then click Configure.
Step 1
Click Database in the left navigation pane.
Step 2
You see the Performance Database (collection interval) page as shown in
Cisco MDS 9000 Family Fabric Manager Configuration Guide
7-60
To configure conditions for sending Warning notifications, check the Send Warning check box. In
the "...when traffic exceeds" field, enter a number to indicate the percentage at which the Warning
notification is sent. For example, entering 150 causes a notification to be sent when traffic for the
selected period exceeds 150% of capacity.
7-60.
Chapter 7
See"Importing the RRD Statistics Index" section on
Figure
OL-17256-03, Cisco MDS NX-OS Release 4.x
Fabric Manager Web Client
7-56.