Chapter 14
Configuring FlexAttach Virtual pWWN
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Replacing a Server on the Same Port
To replace a failed server with a new server on the same port, follow these steps:
Step 1
In the Fabric Manger window, select Tools > FlexAttach > Replace Server.
The Replace Failed Server window is displayed.
Figure 14-18
In the Replace Server Wizard, click the On Same Port radio button.
Step 2
Click Next.
Step 3
The Failed Port window is displayed.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Replace Server Wizard
(Figure
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Using the Server Admin FlexAttach Wizards
(Figure
14-18)
14-19)
14-19