Renaming Zones, Zone Sets, And Aliases - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Zone Set Duplication
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
d.
e.
Click Restore to continue or click Cancel to close the dialog box without restoring.
Step 5
Note Click View Config to see information on how the zone configuration file from a remote server will be
restored. When you click Yes in this dialog box, you will be presented with the CLI commands that are
executed. To close the dialog box, click Close.
Backup and Restore options are available to switches that run Cisco NX-OS Release 4.1(3a) or later.
Note

Renaming Zones, Zone Sets, and Aliases

To rename a zone, zone set, or alias using Fabric Manager, follow these steps:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2 Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN (see
Figure 30-35
Click a zone or zone set in the left pane.
Step 3
Choose Edit > Rename.
Step 4
Cisco MDS 9000 Family Fabric Manager Configuration Guide
30-34
Password—Enter the password for the user.
File Name—Enter the path and the filename.
Edit Local Full Zone Database Dialog Box
Chapter 30 Configuring and Managing Zones
Figure 30-35).
OL-17256-03, Cisco MDS NX-OS Release 4.x