Configuring Module Interface Shared Resources - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring Module Interface Shared Resources

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 22-20
PortChannel
Members
Generation 3
interfaces
1. If resources are not available.
Configuring Module Interface Shared Resources
This section describes how to configure Generation 2 and Generation 3 module interface shared
resources and contains the following sections:
•
•
•
•
•
•
•
•
•
•
Configuration Guidelines for 48-Port, 24-Port, and 4/44-Port 8-Gbps Fibre
Channel Switching Modules
The 48-Port, 24-Port, and 4/44-Port 8-Gbps Fibre Channel switching modules support the following
features:
•
Cisco MDS 9000 Family Fabric Manager Configuration Guide
22-28
PortChannel Configuration and Addition Results (continued)
Configured Speed
PortChannel
Auto
Auto max 2000
Auto max 2000
Auto
Auto max 2000
Auto
Configuration Guidelines for 48-Port, 24-Port, and 4/44-Port 8-Gbps Fibre Channel Switching
Modules, page 22-28
Configuration Guidelines for 48-Port and 24-Port 4-Gbps Fibre Channel Switching Modules,
page 22-30
Configuration Guidelines for 12-Port 4-Gbps Switching Module Interfaces, page 22-31
Configuration Guidelines for 4-Port 10-Gbps Switching Module Interfaces, page 22-31
Configuring Port Speed, page 22-32
Configuring Rate Mode, page 22-33
Configuring Oversubscription Ratio Restrictions, page 22-34
Configuring Bandwidth Fairness, page 22-37
Taking Interfaces Out of Service, page 22-40
Releasing Shared Resources in a Port Group, page 22-41
1-Gbps, 2-Gbps, 4-Gbps, and 8-Gbps speed traffic
Chapter 22 Configuring Generation 2 and Generation 3 Switching Modules
New Member
New Member Type
Auto Generation 1
Auto Generation 1
Auto Generation 2
Auto max 2000 Generation 2
Auto Generation 3
Auto max 2000 Generation 3
Addition Type Result
Normal or force Fail
Normal or force Pass
Normal Fail
Force Pass
Normal Fail
Force Pass
Normal Fail
Force Pass
Normal Fail
Force Pass
OL-17256-03, Cisco MDS NX-OS Release 4.x