Performance
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 7-17
Expand a fabric and select one of the VSANs to display the other statistics in that VSAN.
Step 2
There are variations to this procedure. In addition to these basic steps, you can also:
Note
•
•
To configure Other Statistics, follow the instructions described in the
Note
section on page
Viewing Detailed Traffic Information
To view SPAN port detailed traffic using Fabric Manager Web Client, follow these steps:
Click the Performance tab, and then click Traffic Analyzer.
Step 1
You see the Traffic Analyzer tab window as shown in
Cisco MDS 9000 Family Fabric Manager Configuration Guide
7-24
Others Tab
Select the time range, and click Filter to filter the display.
Select the IP address of a switch from the Name column to see a graph of the traffic across that
switch for the past 24 hours. You can change the time range for this graph by selecting it from the
drop-down list in the upper right corner.
7-57.
Chapter 7
Fabric Manager Web Client
"Configuring Other Statistics"
Figure
7-18.
OL-17256-03, Cisco MDS NX-OS Release 4.x