Enabling Port Security - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Enabling Port Security

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Click Close to exit the Insert Port Security window.
Step 9
Note
Click Finish to complete the Port Security Configuration for the selected switch.
Step 10
Enabling Port Security
By default, the port security feature is disabled in all switches in the Cisco MDS 9000 Family.
To enable port security using Fabric Manager, follow these steps:
Step 1 Expand a VSAN and then select Port Security in the Logical Domains pane.
You see the port security configuration for that VSAN in the Information pane (see
Figure 46-5
Click the CFS tab.
Step 2
You see the information show in
Figure 46-6
Enable CFS on all participating switches in the VSAN by clicking each entry in the Global column and
Step 3
selecting enable.
Click Apply Changes to enable CFS distribution for the port security feature.
Step 4
Cisco MDS 9000 Family Fabric Manager Configuration Guide
46-8
To delete an entry in the Edit and Activate Configuration page of the wizard, select the entry and
click the Delete button.
Port Security Configuration
Figure
Port Security CFS
46-6.
Chapter 46 Configuring Port Security
Figure 46-5).
OL-17256-03, Cisco MDS NX-OS Release 4.x