Reloading Modules - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 19 Managing Modules
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 19-3
Module Status
Output
powered up
testing
initializing
failure
ok
power-denied
active
HA-standby
standby
To view the state of a module from Device Manager, choose Physical > Modules. The dialog box
displays the status of every module.
This example shows the output of the dir bootflash: command:
root
admin
admin
root
root
admin
admin
root
admin
admin

Reloading Modules

You can reload the entire switch, reset specific modules in the switch, or reload the image on specific
modules in the switch.
This section includes the following topics:
•
OL-17256-03, Cisco MDS NX-OS Release 4.x
Module States
Description
The hardware has electrical power. When the hardware is powered up, the
software begins booting.
The switching module has established connection with the supervisor
module and the switching module is performing bootup diagnostics.
The diagnostics have completed successfully and the configuration is being
downloaded.
The switch detects a switching module failure upon initialization and
automatically attempts to power-cycle the module three times. After the third
attempt it continues to display a failed state.
The switch is ready to be configured.
The switch detects insufficient power for a switching module to power up.
This module is the active supervisor module and the switch is ready to be
configured.
The HA switchover mechanism is enabled on the standby supervisor module
(see the "HA Switchover Characteristics" section on page
The warm switchover mechanism is enabled on the standby supervisor
module (see the
14502912 Jan 13 12:23:52 1980 kickstart_image1
14424576 Jan 14 06:47:29 1980 kickstart_image2
14469632 Jan 14 01:29:16 1980 kickstart_image3
14490112 Jan 08 07:25:50 1980 kickstart_image4
12288 Jan 16 15:49:24 1980 lost+found/
14466048 Jan 14 02:40:16 1980 kickstart_image5
24206675 Jan 14 02:57:03 1980 m9500-sf1ek.bin
19084510 Jan 13 12:23:28 1980 system_image1
19066505 Jan 14 06:45:16 1980 system_image2
18960567 Jan 14 01:25:21 1980 system_image5
Usage for bootflash: filesystem
158516224 bytes total used
102400 bytes free
167255040 bytes available
Reloading a Switch, page 19-6
"HA Switchover Characteristics" section on page
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Reloading Modules
17-2).
17-2).
19-5