Deleting An Existing File Or Directory - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Using the File System
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 16-4
Step 2 Select the device and partition from the drop-down lists for the directory where you want to create the
directory.
Step 3 Click the Create Directory icon to create a directory.
You see the Create New Directory dialog box as shown in
Figure 16-5
Enter the name of the new directory, and click OK.
Step 4
You see the new directory in the directory listing.
Tip

Deleting an Existing File or Directory

To delete a file or directory using Device Manager, follow these steps:
Click Admin > Flash Files.
Step 1
By default, you see the bootflash: directory listed for the supervisor's local partition (see
Cisco MDS 9000 Family Fabric Manager Configuration Guide
16-4
Flash Files Dialog Box
New Directory Dialog Box
Any directory saved in the volatile: file system is erased when the switch reboots.
Chapter 16 Managing Configuration Files
Figure 16-5.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Figure 16-6).