Chapter 30
Configuring and Managing Zones
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 30-5
Check the check box in the Ports Zoned To column for the port you want to add or remove from a zone.
Step 3
The check box for the matching port is similarly set. The selected port pair is added or removed from
the zone, creating a two-device zone.
The VSAN drop-down menu provides a filter that enables you to zone only those devices within a
selected VSAN.
Right-click any of the column names to show or hide a column.
Step 4
Click Next to verify the changes.
Step 5
You see the Confirm Changes dialog box shown in
OL-17256-03, Cisco MDS NX-OS Release 4.x
Quick Config Wizard
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Using the Quick Config Wizard
Figure
30-6.
30-9