Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 167

Chapter 5 Fabric Manager Client
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 5-10
Enter a group name in the Name field.
Step 2
Use the arrows to move additional switches or end ports from the Available column to the Selected
Step 3
column.
Click OK to save the group.
Step 4
To add a switch or end port to an existing group in Fabric Manager, follow these steps:
Right-click a switch or end device and select Group > Add To > YourGroupName.
Step 1
You see the Edit User Defined Group dialog box (see
Use the arrows to move additional switches or end ports from the Available column to the Selected
Step 2
column.
Click OK to save the updated group.
Step 3
To filter the display by a group you have created, follow these steps:
Expand the Groups folder in the Logical Domains pane.
Step 1
You see the list of groups that you have created as shown in
Figure 5-11
Click the name of the group that you want to filter.
Step 2
OL-17256-03, Cisco MDS NX-OS Release 4.x
Edit User Defined Group Dialog Box
Group Highlighted in Fabric Pane Map
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Fabric Manager Client Quick Tour: Admin Perspective
Figure 5-10).
Figure 5-11.
5-29