Adding, Editing, And Removing Managed Fabrics - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Admin
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 7-38
Select the services you want to start, restart, or stop.
Step 2
Click Start or Stop, or Restart.
Step 3
The selected services are started, restarted, or stopped.
Note
Note

Adding, Editing, and Removing Managed Fabrics

Fabric Manager Web Client reports information gathered by the Fabric Manager Server on any fabric
known to the Fabric Manager Server.
To start managing a fabric from the Fabric Manager Server using Fabric Manager Web Client, follow
these steps:
Click the Admin tab, and then click Configure.
Step 1
Click Fabrics in the left navigation pane.
Step 2
You see the list of fabrics (if any) managed by Fabric Manager Server in the Opened column (see
Figure
Cisco MDS 9000 Family Fabric Manager Configuration Guide
7-46
Fabric Manager Services Status
If the word "more" is in the Status column, you can click it to view a detailed status of the
service.
You need to configure Performance collection in order to start, stop or restart Performance
Collector.
7-39).
Chapter 7 Fabric Manager Web Client
OL-17256-03, Cisco MDS NX-OS Release 4.x