Preserving The Module Configuration - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 19 Managing Modules
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Check the Reset check box in the row for the module(s) you want to reset.
Step 4
Click the Apply Changes icon.
Step 5
Caution

Preserving the Module Configuration

Use the copy running-config to startup-config procedure to save the new configuration into nonvolatile
storage. Once this procedure is complete, the running and the startup copies of the configuration are
identical.
To preserve the module configuration using Fabric Manager, follow these steps:
Do one of the following in the Logical Domains pane:
Step 1
•
•
•
Expand Switches and select Copy Configuration in the Physical Attributes pane.
Step 2
You see a list of switches (see
Figure 19-3
Click individual Select check boxes for switch configurations to copy.
Step 3
In the From column, ensure that runningConfig is selected.
Step 4
In the To column, ensure that startupConfig is selected.
Step 5
Click the Apply Changes icon.
Step 6
Table 19-4
OL-17256-03, Cisco MDS NX-OS Release 4.x
Resetting a module disrupts traffic through the module.
Click SAN to display a list of all switches in the SAN.
Click one of the fabrics to display a list of switches for that fabric.
Click a VSAN to display a list of switches for that VSAN.
List of Switches Available to Copy
displays various scenarios when module configurations are preserved or lost.
Figure 19-3).
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Preserving the Module Configuration
19-7