Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 408

Default Settings
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 19-10
Parameters
Initial state when installed
Cisco MDS 9000 Family Fabric Manager Configuration Guide
19-14
Default SSM Settings
Default
• Power-down state on switches with Cisco MDS SAN-OS
Release 2.1(1a) and earlier installed.
Fibre Channel switching mode on switches with Cisco MDS
•
SAN-OS Release 2.1(2) and NX-OS Release 4.1(1b), or later
installed and SSMs with EPLD version 2.0 (2) and later
installed.
Chapter 19 Managing Modules
OL-17256-03, Cisco MDS NX-OS Release 4.x