Recovering An Ivr Full Zone Database - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

IVR Zones and IVR Zone Sets
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 29-21
Select a Zoneset folder and then click Activate to activate the zone set (shown in
Step 2
Deactivate to deactivate an activated zone set.
You see the Save Configuration dialog box shown in
Figure 29-22
(Optional) Check one of the Save Running to Configuration check boxes to save these changes to the
Step 3
startup configuration (see
Click Continue Activation to activate the zone set (see
Step 4
zone set.
Note

Recovering an IVR Full Zone Database

You can recover an IVR zone database by copying the IVR full zone database from another switch.
To recover an IVR zone database using Fabric Manager, follow these steps:
Choose Zone > IVR > Edit Local Full Zone Database.
Step 1
You see the Edit IVR Local Full Zone Database dialog box.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
29-28
Edit Zone Database Dialog Box
Save Configuration Options for a New Zone Set
Figure 29-22).
The active zone set in Edit Zone is shown in bold if any change has been made to the full zone
set resulting in a difference between the active zone set and full zone set. Activating the zone set
unbolds it.
Chapter 29 Configuring Inter-VSAN Routing
Figure 29-22.
Figure 29-22) or Yes if you are deactivating the
OL-17256-03, Cisco MDS NX-OS Release 4.x
Figure 29-21) or click