Configuring Aaa Information; Adding And Removing Users - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 7 Fabric Manager Web Client
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Cisco Fabric Manager 3.0(1) does not require you to make changes to the communities.properties file
Note
even if you are using a Cisco MDS 9020 switch or any third-party devices.

Configuring AAA Information

To configure Fabric Manager Server preferences, click the Admin tab, click Configure and then in left
pane select, FMS Users, and AAA and follow the instructions on the screen.

Adding and Removing Users

You can use Fabric Manager Web Client to add and remove Web Server users.
To add a user using Fabric Manager Web Client, follow these steps:
Click the Admin tab, and then click Configure.
Step 1
Click Local Database in the left navigation pane.
Step 2
You see the Local Database page shown in
Figure 7-47
Step 3 Click Add.
You see the Add User dialog box shown in
OL-17256-03, Cisco MDS NX-OS Release 4.x
Local Database Page
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Figure 7-47.
Figure 7-48.
Admin
7-53