Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 311

Chapter 13 Using the CFS Infrastructure
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 13-6
From the NPV Device to retrieve peer list from drop-down list box, select the device to retrieve the
Step 2
peer list from.
If the NPV device in the list retrieved from the switch is present in the fabric, then one of the following
statuses is displayed: Local, Reachable, Unreachable, or Discovery in Progress. If the NPV device is not
present in the fabric, then the status is displayed as Not in Fabric.
Note
Click Add.
Step 3
The following dialog box is displayed with the list of all the NPV devices in the fabric that are not
included in the current peer list. By default, all the switches in the list are selected.
Figure 13-7
OL-17256-03, Cisco MDS NX-OS Release 4.x
NPV Device Selection
If the status is displayed as Not in Frabic, you must remove the device from the list.
Peer Selection
Cisco MDS 9000 Family Fabric Manager Configuration Guide
CFS Distribution over IP
13-13