Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 339

Chapter 14 Configuring FlexAttach Virtual pWWN
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 14-16
From the Select a Switch drop-down list box, select the switch.
Step 7
Note
From the list of interfaces, select the port to which you want to move the server to.
Step 8
Click Next.
Step 9
The Server WWN window is displayed.
OL-17256-03, Cisco MDS NX-OS Release 4.x
New Port Selection
If the Another Port on the Same Switch radio button was chosen, then the Select Switch
drop-down list is disabled.
Using the Server Admin FlexAttach Wizards
(Figure 14-17)
Cisco MDS 9000 Family Fabric Manager Configuration Guide
14-17