Periodically Validating A Tacacs+ Server; Displaying Tacacs+ Server Statistics; About Users Specifying A Tacacs+ Server At Login; Allowing Users To Specify A Tacacs+ Server At Login - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring TACACS+ Server Monitoring Parameters
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You can configure this option to test the server periodically, or you can run a one-time only test.

Periodically Validating a TACACS+ Server

To configure the switch to periodically test a TACACS+ server using Fabric Manager, see the
"Configuring TACACS+ Server Monitoring Parameters" section on page

Displaying TACACS+ Server Statistics

To display TACACS+ server statistics using Fabric Manager, follow these steps:
Expand Switches > Security > AAA, and then select TACACS+.
Step 1
You see the TACACS+ configuration in the Information pane.
Choose the Statistics tab.
Step 2
You see the TACACS+ server statistics.

About Users Specifying a TACACS+ Server at Login

By default, an MDS switch forwards an authentication request to the first server in the TACACS+ server
group. You can configure the switch to allow the user to specify which TACACS+ server to send the
authenticate request. If you enable this feature, the user can log in as username@hostname, where the
hostname is the name of a configured TACACS+ server.

Allowing Users to Specify a TACACS+ Server at Login

To configure the switch to allow users to specify a TACACS+ server at login using Fabric Manager,
follow these steps:
Expand Switches > Security > AAA, and then select TACACS+.
Step 1
You see the TACACS+ configuration in the Information pane.
Click the Defaults tab.
Step 2
You see the TACACS+ default settings.
Step 3 Check the DirectedReq check box.
Step 4 Click the Apply Changes icon to save the changes.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
41-18
Chapter 41 Configuring RADIUS and TACACS+
41-14.
OL-17256-03, Cisco MDS NX-OS Release 4.x