Chapter 22
Configuring Generation 2 and Generation 3 Switching Modules
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 22-2
Table 22-7
Reservation Configuration dialog box for the 8-Gbps modules.
Table 22-7
Module
DS-X9248-96K9
48-Port 8-Gbps Fibre
Channel module
DS-X9224-96K9
24-Port 8-Gbps Fibre
Channel module
DS-X9248-48K9
4/44-Port 8-Gbps
Host-Optimized Fibre
Channel module
1. Auto is 8 Gbps.
Click Apply.
Step 4
Dynamic Bandwidth Management
On port switching modules where bandwidth is shared, the bandwidth available to each port within a port
group can be configured based on the port rate mode and speed configurations. Within a port group, some
ports can be configured in dedicated rate mode while others operate in shared mode.
OL-17256-03, Cisco MDS NX-OS Release 4.x
RateMode Configuration Dialog Box
describes the default RateMode configuration schemes available in the Bandwidth
RateMode Configuration Schemes
Available RateMode Config Macros
Dedicated 4 Gbps on the first port of each group and the remaining ports
•
8 Gbps shared
Dedicated 8 Gbps on the first port of each group and the remaining ports
•
8 Gbps shared
Shared 8 Gbps on all ports (initial & default settings)
•
Dedicated 8 Gbps on the first port of each group and the remaining ports
•
8G shared
Shared Auto
•
Dedicated 2 Gbps on the first port of each group and the remaining ports
•
4 Gbps shared
Dedicated 8 Gbps on the first port of each group and the remaining ports
•
4 Gbps shared
Shared Auto with Maximumu of 4 Gbps on all ports (initial & default
•
settings)
1
on all ports (initial & default settings)
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Port Groups and Port Rate Modes
22-9