Optional) Installing A Lan Switch - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide
Figure 15-8 Installing a VCN500
Step 4 Connect the VCN500 power cable to the rPDU.
----End

15.1.3 (Optional) Installing a LAN Switch

Preparations
Tool: Phillips screwdriver
Materials: LAN switch and accessories
Document: installation position diagram for monitoring devices in the network cabinet
Procedure
Step 1 Determine the mounting holes for a LAN switch based on the installation position diagram for
monitoring devices in the network cabinet, adjust the guide rails, and install floating nuts.
Step 2 Install the mounting ears delivered with the LAN switch, and secure the LAN switch to the
rack rails in the front of the cabinet.
Issue 02 (2018-03-31)
This section describes only the installation method. The actual product appearance prevails.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 Installing Monitoring Devices
184