Huawei FusionModule2000 Installation Manual page 125

FusionModule2000 Smart Modular Data Center
Installation Guide

Verify that the rubber strips are closely attached to the glass doors.

The rubber strip baffle plate outside the glass doors should face the aisle containment, and
the top of the rubber strip should be flush with the glass doors, as shown by (1) in
10-25.

The rubber strip attaching surfaces at the inner side of the glass doors should be parallel,
and the top of the rubber strip should be flush with the glass doors, as shown by (2) in
Figure

The rubber strip baffle plates under the glass doors should be installed outside the aisle
containment, and the rubber strip width should be the same as the glass door width, as
shown by (3) in
2.
Issue 02 (2018-03-31)
Figure 10-25 Installing glass door rubber strips
10-25.
Figure 10-25.
Snap the guide rail into the upper frame mounting kit. Secure the guide rail to the door
frame using five M6x16 screw assemblies, as shown by (1) in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Installing the Aisle Containment
Figure 10-26.
Figure
116