A Appendix; Installing An Expansion Bolt - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide
A.1 Installing an Expansion Bolt
Preparations
Tools: adjustable wrench, hammer drill, rubber mallet, protective gloves, vacuum cleaner
Material: expansion bolt
Procedure
Step 1 Drill a hole at the position for installing the expansion bolt using a hammer drill with the hole
depth of 52 mm to 60 mm.
Step 2 Partially tighten the expansion bolt and vertically insert it into the hole. Knock the expansion
bolt using a rubber mallet until the expansion sleeve is fully inserted into the hole.
Step 3 Rotate the expansion bolt clockwise using a wrench until the expansion sleeve fully expands.
Step 4 Rotate the expansion bolt counterclockwise to remove it together with the spring washer and
flat washer.
Issue 02 (2018-03-31)
Put aside the removed expansion bolt for securing the cabinet.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A
Appendix

A Appendix

293