Huawei FusionModule2000 Installation Manual page 86

FusionModule2000 Smart Modular Data Center
Installation Guide
Figure 7-9 Installed enclosure frame
(1) Enclosure frame
Preparations
Tool: Phillips screwdriver
Materials: enclosure frame, M5 tapping screw
Procedure
Step 1 Open the front door, and remove the LCD power cable and front door ground cable. Then lift
and remove the front door.
Step 2 Use four M5 tapping screws to secure one upper sealing plate to the enclosure frame.
There are two upper sealing plates, and the one used in this step has no gap.
Issue 02 (2018-03-31) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing Air Conditioners
77