Installing A Pad - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide
----End

15.4.9.6 Installing a Pad

Context
The BOM number of a pad is 01091655. The BOM number of the pad mounting bracket is
21203286.
Preparations
Tool: Phillips screwdriver
Materials: pad mounting bracket, pad
Procedure
Step 1 (Optional) If the feet in the lower part of the pad mounting bracket are not as wide as the pad,
adjust the feet, as shown in
1.
2.
3.
Figure 15-58 Adjusting the foot
Step 2 Remove the cable hole baffle plate from the pad mounting kit, as shown by (1) in
15-59.
Issue 02 (2018-03-31)
Figure
Loosen the M4x12 screws on the foot (do not remove it), as shown by (1) in
15-58.
Adjust the foot symmetrically until it is as wide as the pad, as shown by (2) in
15-58.
Tighten the M4x12 screws on the foot, as shown by (3) in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15-58.
15 Installing Monitoring Devices
Figure
Figure
Figure 15-58.
Figure
221