Huawei FusionModule2000 Installation Manual page 218

FusionModule2000 Smart Modular Data Center
Installation Guide
Figure 15-45 Components of a sliding door magnetic lock
(1) Magnetic lock fastener
(3) Magnet
(5) Magnet washer
Preparations
Tool: Phillips screwdriver
Materials: magnetic lock and accessories
Procedure
Step 1 Take out the magnetic lock and disassemble it, and keep the two screws aside.
Step 2 Secure the disassembled magnetic lock to the magnetic lock fastener using the screws
removed in the previous step.
Step 3 Secure the assembly of the magnetic lock and magnetic lock fastener to the guide rail using
three M4 screws.
Step 4 (Optional) Adjust the magnet fastener slightly in the horizontal direction to make the magnet
closely attached to the magnetic lock.
Step 5 Secure the magnet to the magnet fastener using the screws and washers available in the fitting
bag of the sliding door magnetic lock.
Issue 02 (2018-03-31) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 Installing Monitoring Devices
(2) Magnetic lock
(4) Magnet fastener
209