Huawei FusionModule2000 Installation Manual page 265

FusionModule2000 Smart Modular Data Center
Installation Guide
(1) Cable outlet
Step 6 Secure the magnetic lock, as shown by (2) in
Step 7 Install the magnet.
1.
2.
When securing the magnet to the door panel, do not over-tighten the screws so that the rubber pad is
elastic. The rubber pad will adjust the magnet to a correct position because of its elasticity.
Figure 16-18 Installing a magnet
(1) Rubber pad
Step 8 (Optional) Adjust the magnet.
Issue 02 (2018-03-31)
Take out the magnet, and knock the positing pins of the magnet into the magnet using a
rubber mallet.
Figure 16-17 Installing positioning pins of a magnet
Insert the assembled magnet into the positioning holes in the door, and secure the magnet
to the door using the screws and rubber pad delivered with the magnetic lock, as shown
in Figure 16-18.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16 (Optional) Installing In-Room Access Control
Figure 16-15.
Devices and Cameras
256