FusionModule2000 Smart Modular Data Center
Installation Guide
1.
2.
Step 2 Route the camera cable through the control skylight.
Step 3 Align the holes in the camera base with the holes in the control skylight, and use three M3
screws to secure the camera to the control skylight.
Issue 02 (2018-03-31)
Loosen the screws on the front cover of the camera, remove the front cover, and take out
the inner cover clipped on the lens.
Figure 15-22 Removing the front and inner covers
Gently insert the SD card into the SD card slot.
Figure 15-23 Installing an SD card
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 Installing Monitoring Devices
193