Huawei FusionModule2000 Installation Manual page 261

FusionModule2000 Smart Modular Data Center
Installation Guide
Figure 16-10 Installing a magnetic lock
Step 5 Route the magnetic lock cable through the cable hole, and secure the magnetic lock using a
hex key, as shown by (2) in
Step 6 Install the magnet.
1.
2.
When securing the magnet to the door panel, do not over-tighten the screws so that the rubber pad is
elastic. The rubber pad will adjust the magnet to a correct position because of its elasticity.
Issue 02 (2018-03-31)
Figure
Take out the magnet, and knock the positing pins of the magnet into the magnet using a
rubber mallet.
Figure 16-11 Installing positioning pins of a magnet
Insert the assembled magnet into the positioning holes in the door, and secure the magnet
to the door using the screws and rubber pad delivered with the magnetic lock, as shown
in Figure 16-12.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16 (Optional) Installing In-Room Access Control
16-10.
Devices and Cameras
252