Huawei FusionModule2000 Installation Manual page 272

FusionModule2000 Smart Modular Data Center
Installation Guide
Figure 16-26 Marking mounting holes (unit: mm)
Step 3 Drill holes using a hammer drill, and route cables out of the cable hole.
Step 4 Install the emergency door release button.
Figure 16-27 Installing an emergency door release button
1.
2.
3.
----End
Issue 02 (2018-03-31)
Install the base of the emergency door release button, as shown by (1) in
Install the glass panel of the emergency door release button, as shown by (2) and (3) in
Figure 16-27.
Tighten screws of the emergency door release button using a Phillips screwdriver, as
shown by (4) in Figure 16-27.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16 (Optional) Installing In-Room Access Control
Devices and Cameras
Figure 16-27.
263