Huawei FusionModule2000 Installation Manual page 182

FusionModule2000 Smart Modular Data Center
Installation Guide

Floating nuts must be installed in mounting holes alternatively on the dehumidifier.

Three floating nuts need to be installed at each side.
 Ensure that the floating nuts on both sides are on the same horizontal line.

When installing the dehumidifier, verify that the air intake vent faces the cold aisle (as
shown by A in
Figure
Figure 13-3 Installing a floating nut
Step 4 Secure the dehumidifier to the rack rails using M6 screws and dehumidifier mounting ears.
Figure 13-4 Installing a dehumidifier
Step 5 Connect the dehumidifier drainpipe.
Issue 02 (2018-03-31)
Figure 13-1), and the air exhaust vent faces the hot aisle (as shown by B in
13-1).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 (Optional) Installing Dehumidifiers
173