Huawei FusionModule2000 Installation Manual page 126

FusionModule2000 Smart Modular Data Center
Installation Guide
3.
It is recommended that two people perform this operation.
4.
5.
6.
Press down the stop block springs when installing the stop block screws.
Step 3 Install dampers, as shown in
Issue 02 (2018-03-31)
Figure 10-26 Installing the guide rail and glass doors
Push the glass doors into the guide rail, and pull the glass doors outwards to allow the
door handles to pass through the posts, as shown by (2) and (3) in
Push the stop blocks into the guide rail with the screw holes facing outwards, as shown
by (4) in Figure 10-26.
Tighten the two M6 screws at both ends of the guide rail, as shown by (5) in
10-26.
Push the stop blocks outwards to the M6 screws at the ends of the guide rail, and use a
flat-head screwdriver to secure the stop blocks with two M6 screws, as shown by (6) and
(7) in Figure 10-26.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 10-27.
10 Installing the Aisle Containment
Figure 10-26.
Figure
117