Chapter 2: Setup; Requirements - Xilinx KCU105 User Manual
Pci express streaming data plane trd
Hide thumbs
Also See for KCU105:
- User manual (143 pages) ,
- Software install and board setup (32 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Setup
This chapter identifies the hardware and software requirements, and the preliminary setup
procedures required prior to bringing up the targeted reference design.
Requirements
Hardware
Board and Peripherals
•
KCU105 board with the Kintex® UltraScale™ XCKU040-2FFVA1156E FPGA
•
USB cable, standard-A plug to micro-B plug (Digilent cable)
•
Power supply: 100 VAC–240 VAC input, 12 VDC 5.0A output
•
ATX power supply
•
ATX power supply adapter
Computers
A control computer is required to run the Vivado® Design Suite and configure the on-board
FPGA. This can be a laptop or desktop computer with any operating system supported by
Vivado tools, such as Redhat Linux or Microsoft® Windows 7.
The reference design test configuration requires a host computer comprised of a chassis
containing a motherboard with a PCI Express slot, monitor, keyboard, and mouse. A DVD
drive is also required if a Linux operating system is used. If a Windows 7 operating system
is used, the 64-bit Windows 7 OS and the Java SE Development Kit 7 must be installed.
PCIe Streaming Data Plane TRD
UG920 (v2017.1) June 01, 2017
www.xilinx.com
Chapter 2
9
Send Feedback
Advertisement
Table of Contents
