Xilinx KCU105 User Manual page 13

Install the KCU105 Board
1. Remove all rubber feet and standoffs from the KCU105 board.
2. Power down the host chassis and disconnect the power cord.
Remove the power cord to prevent electrical shock or damage to the KCU105 board or other
CAUTION!
components.
3. Ensure that the host computer is powered off.
4. Open the chassis. Select a vacant PCIe Gen2-capable expansion slot and remove the
expansion cover at the back of the chassis.
5. Plug the KCU105 board into the PCIe connector slot, as shown in
X-Ref Target - Figure 2-3
PCIe Streaming Data Plane TRD
UG920 (v2017.1) June 01, 2017
Figure 2-3: PCIe Connector Slot
www.xilinx.com
Chapter 2: Setup
Figure 2-3.
UG920_c3_01_061915
13
Send Feedback