Xilinx KCU105 User Manual page 72

5. After the device drivers are installed, the Control & Monitoring GUI window displays as
shown in Figure
X-Ref Target - Figure 5-17
Figure 5-17: Control & Monitoring GUI for Ethernet Application
6. Open a terminal with super user permissions and check the IP address for both of the
MACs with this command:
$ ifconfig
PCIe Streaming Data Plane TRD
UG920 (v2017.1) June 01, 2017
Chapter 5: Targeted Reference Design Details and Modifications
5-17. Check that PHY link up LEDs on the GUI are green.
www.xilinx.com
UG920_c5_17_020615
72
Send Feedback