Remove Drivers From The Host Computer; (Windows Only) - Xilinx KCU105 User Manual

Remove Drivers from the Host Computer

(Windows Only)

Shutdown the host computer and power off the KCU105 board. Then use the following
IMPORTANT:
steps to remove the Windows drivers.
1. Power on the host computer, and from Windows Explorer, navigate to the folder in
which the reference design is downloaded
(<dir>\kcu105_axis_dataplane\software\windows\). Run the setup file with
Administrator privileges.
2. Click Next after the InstallShield Wizard opens.
3. Select Remove and click Next.
4. Click Remove to remove drivers from the host system.
5. Click Finish to exit the wizard.
PCIe Streaming Data Plane TRD
UG920 (v2017.1) June 01, 2017
www.xilinx.com
Chapter 3: Bringing Up the Design
Send Feedback
32