Xilinx KCU105 User Manual page 20

b. In the Bitstream file field, browse to the location of the BIT file
<working_dir>/kcu105_axis_dataplane/ready_to_test/trd03_base_
top.bit and click Program (see
X-Ref Target - Figure 3-5
5. After the FPGA is programmed, the DONE LED status should illuminate as shown in
Figure 3-6.
X-Ref Target - Figure 3-6
PCIe Streaming Data Plane TRD
UG920 (v2017.1) June 01, 2017
Figure 3-5).
Figure 3-5: Program Device Window
Figure 3-6: GPIO LED Indicators
www.xilinx.com
Chapter 3: Bringing Up the Design
UG920_c3_08_092414
Send Feedback
20