Xilinx KCU105 User Manual page 14

6. Connect the ATX power supply to the KCU105 board using the ATX power supply
adapter cable as shown in
A 100 VAC–240 VAC input, 12 VDC 5.0A output external power supply can be substituted
Note:
for the ATX power supply.
X-Ref Target - Figure 2-4
7. Slide the KCU105 board power switch SW1 to the ON position (ON/OFF is marked on the
board).
PCIe Streaming Data Plane TRD
UG920 (v2017.1) June 01, 2017
Figure 2-4.
Figure 2-4: Power Supply Connection to the KCU105 Board
www.xilinx.com
Chapter 2: Setup
UG920_c3_02_061915
14
Send Feedback