Xilinx KCU105 User Manual page 107

4. Try ping between the machines.
5. Make one end a server. On a terminal, invoke netserver as shown:
$ netserver
6. Make the other end a client. On a terminal, run netperf:
$ netperf -H <IP-address>
This runs a ten second TCP_STREAM test by default and reports outbound performance.
PCIe Streaming Data Plane TRD
UG920 (v2017.1) June 01, 2017
www.xilinx.com
Appendix F: Network Performance
Send Feedback
107