Xilinx KCU105 User Manual page 75

10. Click the X mark on the top right corner of the GUI to close the GUI. It uninstalls the
drivers and returns to the TRD Setup screen
X-Ref Target - Figure 5-21
Figure 5-21: Uninstall Device Drivers and Close the Ethernet Application GUI
Setup Procedure for Ethernet Design in Performance Mode
The setup procedure for Raw Ethernet is the same as for Ethernet Application until BIT file
programming. The BIT file is the same as the one for the 2x10G application test.
1. After the PC boots from the Fedora 20 LiveDVD, copy the folder software to the /tmp
directory.
2. Log in as super user by typing su on the terminal.
3. Enter cd /tmp/software
4. Enter chmod +x quickstart.sh
PCIe Streaming Data Plane TRD
UG920 (v2017.1) June 01, 2017
Chapter 5: Targeted Reference Design Details and Modifications
(Figure
www.xilinx.com
5-21).
Send Feedback
UG920_c5_21_020615
75