Xilinx KCU105 User Manual page 23

Run the Design
1. Navigate to the <working_dir>/kcu105_axis_dataplane/software folder and
open a terminal. (The TRD files were extracted to your <working_dir> in
the Targeted Reference Design Files, page
2. Enter:
$ cd /home/<working_dir>/kcu105_aximm_dataplane
$ su
$ chmod +x quickstart.sh
$ ./quickstart.sh
3. The TRD setup screen is displayed
with an ID of 8082 in lspci—by default the AXI Stream Dataplane design is selected.
Choose GEN-CHK under the Performance section menu. Click Install to install the
drivers. (This takes you to the Control & Monitoring GUI shown in
X-Ref Target - Figure 3-8
PCIe Streaming Data Plane TRD
UG920 (v2017.1) June 01, 2017
--> command to login as super user
(Figure
Figure 3-8: TRD Setup Screen with a PCIe Device Detected
www.xilinx.com
Chapter 3:
10).
3-8) and indicates detection of a PCIe device
Bringing Up the Design
Download
Figure 3-12.)
UG920_c3_10_041615
23
Send Feedback