Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 65

Preface
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Chapter
Chapter 50
Chapter 51
Chapter 52
Chapter 53
Chapter 54
Chapter 55
Chapter 56
Chapter 57
Chapter 58
Chapter 59
Chapter 60
Chapter 61
Chapter 62
Chapter 54
Chapter 63
Chapter 64
OL-17256-03, Cisco MDS NX-OS Release 4.x
Title
Configuring iSCSI
Configuring IP Services
Configuring IP Storage
Configuring IPv4 for Gigabit Ethernet
Interfaces
Configuring IPv6 for Gigabit Ethernet
Interfaces
Configuring SCSI Flow Services and
Statistics
Configuring Fibre Channel Write
Acceleration
Network Monitoring
Performance Monitoring
Configuring RMON
Monitoring Network Traffic Using
SPAN
Configuring System Message
Logging
Configuring Call Home
Configuring the Embedded Event
Manager
Configuring Fabric Configuration
Servers
Configuring Fabric Congestion
Control and QoS
Description
Describes the iSCSI feature that is specific to
the IPS module and is available in the Cisco
MDS 9200 Switches or Cisco MDS 9500
Directors.
Provides details on IP over Fibre Channel
(IPFC) services and provides configuring
IPFC, virtual router, and DNS server
configuration information.
Provides details on extending the reach of Fibre
Channel SANs by connecting separated SAN
islands together through IP networks using
FCIP, and allowing IP hosts to access FC
storage using the iSCSI protocol.
Describes the IPv4 protocol support provided
by Cisco MDS 9000 Family switches.
Describes the IPv6 protocol support provided
by Cisco MDS 9000 Family switches.
Describes the SCSI flow services and SCSI
flow statistics, the Intelligent Storage Services.
Describes Fibre Channel Write Acceleration
support and configuration.
Describes how to use Fabric Manager
monitoring features.
Provides details on using Performance
Manager.
Provides details on using RMONs to configure
alarms and events.
Describes the Switched Port Analyzer (SPAN),
SPAN sources, filters, SPAN sessions, SD port
characteristics, and configuration details.
Describes how system message logging is
configured and displayed.
Provides details on the Call Home service and
includes information on Call Home, event
triggers, contact information, destination
profiles, and e-mail options.
Provides informaiton about configuring
Embedded Event Manager (EEM).
Describes how the fabric configuration server
(FCS) feature is configured and displayed.
Provides details on the quality of service (QoS)
and Fibre Channel Congestion Control (FCC)
features.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
lxv