Download Print this page
Cisco IR809 Product Overview

Cisco IR809 Product Overview

Integrated services routers

Advertisement

Quick Links

Product Overview
This chapter provides an overview of the features available for the Cisco 809 Integrated Services Routers
(ISRs).
Note
For compliance and safety information, see
Series

General Description

The Cisco 809 Integrated Services Router (IR809), part of the Cisco Integrated Services Routers Generation
2 (ISR G2) Family, is designed as a next generation ruggedized fixed form factor router. It is a small-form
factor router with LTE, for use in ATM, POS, Telemetry, Billboards, Enterprise Fleet markets, Utilities and
other SCADA (Supervisory Control and Data Acquisition) environments.
Note
The documentation set for this product strives to use bias-free language. For purposes of this documentation
set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial
identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be
present in the documentation due to language that is hardcoded in the user interfaces of the product software,
language used based on RFP documentation, or language that is used by a referenced third-party product.
The following figure shows the IR809.
SKU Information, on page 7
Power Supply, on page 16
RJ45 Ports, on page 17
Accessories, on page 18
Regulatory Compliance and Safety Information for Cisco 800
Product Overview
1

Advertisement

loading

Summary of Contents for Cisco IR809

  • Page 1: Table Of Contents

    Product Overview This chapter provides an overview of the features available for the Cisco 809 Integrated Services Routers (ISRs). Note For compliance and safety information, see Regulatory Compliance and Safety Information for Cisco 800 Series • General Description, on page 1 •...
  • Page 2 Product Overview General Description Figure 1: Cisco IR809 Integrated Services Router The following figure shows the front panel details of the Cisco IR809. Product Overview...
  • Page 3 USB 2.0 (Type-A Host Port) WAN/WWAN LEDs RESET Button SIM Card LEDs DC Power/Alarm Connector Note LEDs are viewable from the top and from the front of the IR809. The following figure shows the back panel details of the Cisco IR809. Product Overview...
  • Page 4 Figure 3: Cisco IR809 Back Panel DIV TNC connector for 4G Modem SMA connector for GPS SIM0 and SIM1 Card Slots MAIN TNC connector for 4G Modem The following figure shows the top cover details of the Cisco IR809. Product Overview...
  • Page 5 Product Overview LEDs Figure 4: Cisco IR809 Top Cover LEDs The following table describes the LEDs for the Cisco 809 ISR. Product Overview...
  • Page 6 Product Overview LEDs Table 1: LED Descriptions Activity Description Power and System In normal operating mode, after system boots. (typically about Status 2 minutes) Off — No power Green Steady on — Router is reachable, and all interfaces are up and functioning properly Green Flashing —...
  • Page 7: Sku Information

    On - On - Green Green Green SKU Information The following table lists the different SKUs available for the Cisco 809 Integrated Services Router. All SKUs support external antenna. Table 3: Supported SKUs for Cisco IR809s SKU ID Description IR809G-LTE-NA-K9...
  • Page 8: Hardware Features

    1700 MHz (band 9) and TD-SCDMA 1900 MHz (band 39). Memory The Cisco IR809 uses flash memory and main memory. The flash memory contains the Cisco IOS software image and the boot flash contains the ROMMON boot code. All memory components are factory default and not upgradeable by the end user.
  • Page 9: Supported Cisco Antennas And Cables

    0.033 inch or smaller and simultaneously press the reset button while applying power to the router. The reset button works in two different manners: • With the reset button pressed for less than 10 seconds, the IR809 will load with saved start-up configuration at that time.
  • Page 10 Note Before choosing your antenna type and installation scenario, read through the following information. This section lists the supported Antennas and Cables for the Cisco IR809. For detailed information about Cisco Antennas, please refer to the following guides: • Connected Grid Antennas Installation Guide: http://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/antennas/installing/cg_antenna_install_guide.html...
  • Page 11 • Maximum power: 20W • Radome: polycarbonate, UV, white • Material substance compliance: ROHS compliant ANT-4G-PNL-OUT-N Description: Cisco multiband panel outdoor 4G LTE antenna: • Supports 3G and 4G LTE solutions • Multiband • Wall mount and mast mount • Indoor and outdoor •...
  • Page 12 • Radome: polycarbonate, UV resistant, white • Material substance compliance: ROHS compliant ANT-4G-SR-OUT-TNC Description: Cisco integrated 4G LTE low-profile outdoor saucer antenna: • Applicable for both 3G and 4G LTE solutions • Domestic LTE 700 band and global LTE 2600 band •...
  • Page 13 • Environment: indoor • Dimensions (H x Outside dimensions): 3.4 x 7.9 in. (87 x 200 mm) ANT-4G-DP-IN-TNC Description: Cisco indoor swivel-mount dipole antenna • Low-profile blade style sheath • Applicable for both 3G and 4G solutions • Domestic LTE 700 and global LTE 2600 bands •...
  • Page 14 Product Overview 4G-LTE-ANTM-O-3-X • Average efficiency: 55% (698 to 960 MHz) 73% (1710 to 2700 MHz) • Maximum input power: 3 watts • Voltage standing wave ratio (VSWR): < 2.5:1 • Characteristic impedance: 50 ohms • Polarization: linear Mechanical Specifications: •...
  • Page 15 Product Overview 4G-ANTM-OM-CM • Temperature rating: -40 to 185 F (-40 to 85 C) • Mounting: 5/8-inch lug with serrated face nut (5/8-inch diameter hole through mounting surface) • Can be used with the following cable extensions: 4G-CAB-ULL-20 and 4G-CAB-ULL-50 4G-ANTM-OM-CM Description: •...
  • Page 16: Power Supply

    Power Supply The Cisco IR809 comes with an external DC power connector. The 4-pin power entry connector (receptacle) is mounted to the unit. The 4-pin power entry mating connector (plug) is attached to the receptacle. It is removed during installation and used to connect to the DC power source, then reattached to provide power to the unit.
  • Page 17: Rj45 Ports

    RS232 DCE or RS485. Serial port 1 can be configured for RS232 DTE only. The RJ45 serial ports of the IR809 match the RJ45 serial ports for the IR829 router. There is a complete section in the IR829 Hardware Installation Guide that covers port characteristics, cabling, pinouts and much more.
  • Page 18: Accessories

    Table 5: Cisco IR809 Accessories Cisco Part Accessory Number 53-100629-01 Contains Getting started with the Cisco 809 Integrated Services Router document, mounting screws and associated hardware, DC power plug, and the grounding kit. IR809-DINRAIL Standard DIN Rail mounting kit. ANT-3-4G2G1-O...