Table of Contents
Advertisement
HEATER CONTROL ASSEMBLY
1. Heater control assembly
2. A/C switch knob (if equipped)
3. A/C switch LED (if equipped)
4. Bulb
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Remove steering column hole cover.
3) Remove heater control knob (1), center upper garnish (2),
center lower garnish (3) and glove box.
4) Disconnect air outlet control (3), temperature control (2) and
fresh air control (1) cables.
5) Remove heater control assembly (1), and then disconnect
blower fan switch connector (2) after unlock locking part (3)
as shown.
5. Fresh air control cable
6. Air outlet control cable
HEATER AND VENTILATION 1A-9
7. Temperature control cable
8. Heater control knob
Advertisement
Table of Contents
