Table of Contents
Advertisement
REMOVAL
1) Remove console box.
2) Disconnect gear shift and select control cables from gear
shift control lever assembly.
3) Remove gear shift control cable guide nuts and gear shift
lever assembly from body.
4) Disconnect shift and select cables from transmission.
5) Remove E-rings, cable grommet and cable clamp, and then
remove shift and select cables from body.
INSTALLATION
Reverse removal procedure for installation and note as follows.
• Tighten each bolts and nuts to specified torque referring to
previous figure.
• Apply grease to turning or sliding portions.
MANUAL TRANSMISSION 7A-9
Advertisement
Table of Contents
