Table of Contents
Advertisement
7B-110 AUTOMATIC TRANSMISSION (4 A/T)
Lower Valve Body
1) Apply A/T fluid to each valve, spring, sleeve and key.
Insert them, then fix with key.
NOTE:
Make sure that the fail valve No.2 and secondary regula-
tor valve is inserted in the right direction.
2) Insert oil strainers to lower valve body.
NOTE:
Clean oil strainer before installing.
1. Oil strainer
2. Key (short)
3. Fail valve No.1 sleeve
4. Fail valve No.1
5. Cooler by-pass valve
6. Cooler by-pass valve spring
7. Manual valve
8. Secondary regulator valve
9. Secondary regulator valve spring
10. Secondary regulator valve plug
VALVE BODY ASSEMBLY
1) Install new gasket for lower valve body (3), valve body plate
(2) and new gasket for upper valve body (1) to lower valve
body (4).
2) Make sure that steel balls (2) are at the location shown in fig-
ure.
1. Upper valve body
Advertisement
Table of Contents
