Table of Contents
Advertisement
2) Press-fit wheel bearing (1) with it's seal side facing back
plate side using special tools and hydraulic press.
Special tool
(A) : 09913-76010
(B) : 09924-84510-004
3) Install bearing circlip (1) using special tool.
Special tool
(A) : 09900-06108
4) Install wheel sensor ring (if equipped with ABS).
Refer to "REAR WHEEL SENSOR RING" of Section 5E.
5) Install brake drum and wheel. For details, refer to "REAR
BRAKE DRUM" in Section 5.
REAR AXLE SHAFT AND WHEEL BEARING
(4WD VEHICLE)
REMOVAL
1) Hoist vehicle and remove rear wheels.
2) Remove rear brake drum. For details referring to Section 5.
1. 8mm bolt
3) Drain gear oil from rear axle housing by loosening drain plug
(1).
2. Level plug
REAR SUSPENSION 3E-21
Advertisement
Table of Contents
