Table of Contents
Advertisement
7B-126 AUTOMATIC TRANSMISSION (4 A/T)
32) Install parking lock pawl (2).
33) Install parking lock pawl shaft (4), torsional spring (3), and
cover (1), then hold them with 2 bolts.
Tightening torque
Parking lock pawl bolts (a) : 11 N·m (1.1 kg-m, 8.0 lb-ft)
34) Install reverse brake (B2) plates, discs, flange and cushion
plate in following order :
(1) Cushion plate → (2) Plate → (3) Disc → (4) Plate → (5)
Disc → (6) Plate → (7) Disc → (8) Plate → (9) Disc → (10)
Flange
NOTE:
• Note the direction of cushion plate (1).
• Make sure that the plates are fitted into groove of
transmission case as shown in figure.
35) Hold above parts with snap ring.
2. Brake plate side
3. Transmission case side
Advertisement
Table of Contents
