Suzuki Ignis Service Manual page 938

2
3, "A", (a)
2) If thrust play is out of specification, select suitable side
washer from among following available size, install it and
check again that specified gear play is obtained.
Available side washer thickness
0.90, 1.00 and 1.10 mm (0.035, 0.039 and 0.043 in.)
3) Put drive bevel gear (1) on differential case (2) and fasten
them with bolts (3) by tightening them to specified torque.
Use thread lock cement for bolts (3).
CAUTION:
Use of any other bolts than that specified is prohibited.
"A" : Thread lock cement 99000-32110
Tightening torque
1
Drive bevel gear bolts (a) : 80 N·m (8.0 kg-m, 58.0 lb-ft)
4) Press-fit differential side bearings (3) to differential case (1)
by using special tools.
Special tool
(A) : 09951-76010
(B) : 09951-16060
2. Drive bevel gear
REAR DIFFERENTIAL 7F-13